[SOLVED] Question About Ovirt!
#1
Smile 
Hello, 
Just i want to install an manager which is to open vps on my dedicated server, 
So i'm searching for a free panel, i have read about ovirt, 

i have read this post
http://www.server-world.info/en/note?os=..._7&p=ovirt
i have only one d.server and i want to install this, 
i have try to install solusvm, but is needed 2 server one for management and one for node,  
so question is, 
If i start to install ovirt is needed 2 servers one for management one for node? if yes.
management server is only to manage like a simple panel? 
and node server is where will be opened vps's ? 

And if anyone know any better panel for this please suggest me it!
Thanks if you try to help me.!
D❤ᴘᴇ.ᴀʟ Oᴡɴᴇʀ.
#2
The master node can be used to host the control panel and VPS with SolusVM and OpenVZ as virtualization. For KVM or Xen unfortunately another server that hosts the panel (master) and a server that has the VPSs (slave) is required.
#3
thank you for answer, and one last question,
Can i create vps with qemu from gui i have install vnc and desktop on my server and i have install virtual machine manager
Can i use this to create other vps?
i have try, but i have an problem with vps network i have 6 ip's but i can't find how to use those Skeptical
i have try to add this into my /etc/network/interfaces
before modification

Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

now i have try to add one ipv4 
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

auto br0
iface br0 inet static
       address 111.111.0.100
       network 111.111.0.100
       netmask 255.255.255.0
       broadcast 111.111.0.100
       gateway 111.111.0.1
       bridge_ports eth0
       bridge_fd 9
       bridge_hello 2
       bridge_maxage 12
       bridge_stp off

# service networking restart 
After a network restart my server is down, i can't connect it anymore, and i don't have serial console to fix this problem so i have make some re'images (10-20). 
i have read to many tutorials on google how to create this ip but is not working just i have damage my server, 
maybe you know how to create this?
D❤ᴘᴇ.ᴀʟ Oᴡɴᴇʀ.
#4
I am really sorry but I cannot help you any further with KVM because I have never setup a KVM node and therefore I've absolutely no experience.

I tried it once in VMWare but the network also did not work. So I have not been able to gain any experience to help.




Users browsing this thread: 1 Guest(s)