Problem with proftpd
#1
Hello,

Can someone help please with proftpd.
FTP starts normal but i Get every time access denied it was working normal but yesterday noone cant connect to ftp.I restarted the server and started again ftp but same problem.
Tryed with gamepanel to connect but same problem it cant connect.
#2
Try checking the log files according to your platform.
it may be in /var/log/ directory.
Have you changed the port number?
Make sure firewall disabled on the ftp port.
#3
Log
Thu Aug 10 14:46:32 2017 [pid 2] CONNECT: Client "93.186.xxx.xxx"
Thu Aug 10 14:46:34 2017 [pid 1] [dsadas@gmail.com] FAIL LOGIN: Client "93.186.xxx.xxx"
Thu Aug 10 14:46:40 2017 [pid 2] CONNECT: Client "89.164.133.197"
Thu Aug 10 14:46:42 2017 [pid 1] [dsadas@gmail.com] FAIL LOGIN: Client "89.164.xxx.xxx"

I installed vsftpd but same problem access denied

No I didnt change the port

Firewall is disabled
#4
(2017-08-10, 10:49:43 pm)lukazgd Wrote: Log
Thu Aug 10 14:46:32 2017 [pid 2] CONNECT: Client "93.186.xxx.xxx"
Thu Aug 10 14:46:34 2017 [pid 1] [dsadas@gmail.com] FAIL LOGIN: Client "93.186.xxx.xxx"
Thu Aug 10 14:46:40 2017 [pid 2] CONNECT: Client "89.164.133.197"
Thu Aug 10 14:46:42 2017 [pid 1] [dsadas@gmail.com] FAIL LOGIN: Client "89.164.xxx.xxx"

I installed vsftpd but same problem access denied

No I didnt change the port

Firewall is disabled

Make sure vsftpd/proftpd have full access to mentioned directories in the config file.

If above solution didn't work, post your config file here we can analysis further.
Android Fan,Developer and Supporter.
My Websites
http://www.cybapps.com

Thanks to HostDare for VPS
#5
Here is vsftpd conf

Code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/private/vsftpd.pem

#6
Hello,

I removed proftpd and installed vsftpd but still same problem. its gsp panel
#7
(2017-08-10, 7:29:19 pm)lukazgd Wrote: Hello,

Can someone help please with proftpd.
FTP starts normal but i Get every time access denied it was working normal but yesterday noone cant connect to ftp.I restarted the server and started again ftp but same problem.
Tryed with gamepanel to connect but same problem it cant connect.

Wow, the quality of posts above are pretty low...

Anyway, the problem is authentication. Since you're using GSP, ProFTPd probably can't connect to SQL for FTP logins.
I have VPS 18 (Hostigation) and 24 (HostDare).
#8
OP doesn't appear to be paying attention to the thread. Closed.




Users browsing this thread: 1 Guest(s)

Switch to mobile version

Sponsors: Ftpit - ZXPlay - GalaxyHostPlus - Verelox- HostUS - Host4Fun - Evolution-Host - NodeBlade - HostDare - VPSMost


BitCoin donations: 1DQxbstaTb5SWk6QC2gFeQUTFR64JX4cEo